Produktų asortimentas apima aukščiausios kokybės siūlių rišiklį, remonto priemonę bei pagalbinius produktus

Nuostabūs sprendimai

Jau daugiau nei 25 metus, ROMEX® yra pasaulinis lyderis sintetinių gumų pagrindų gaminamų rišiklių rinkoje. Rišikliai kuriami siekiant patenkinti visus reikalavimus, suteikiant solidžiai atrodantį, švarų paviršių.

Products

ROMPOX® - FLEX-JOINT

The viscous elastic paving joint mortar

ROMPOX® - FLEX-JOINT is a 2 component paving joint mortar, suitable for joint widths from five millimetres and joint depths from 30 millimetres on surfaces with medium traffic loads. It is the first and only viscous elastic jointing mortar on the market. Thanks to it’s maximum elongation ε of 9,26 % the material can be used for bonded and unbonded construction. It is water permeable, self-compacting and water emulsifiable. The jointing mortar ROMPOX® - FLEX-JOINT also prevents all weed growth.

  • for medium traffic loads up to 7,5 t (up to 25 t in combination with the anchor protectors)
  • for joint widths from 5 mm
  • for joint depths from 30 mm
  • can be built to fulfill the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 25 kg bucket

ROMPOX® - D2000

The modern paving joint mortar

ROMPOX® - D2000 is ...

  • for medium to heavy traffic loads
  • for joint widths from 5 mm
  • for joint depths from 30 mm (in case of traffic loads 2/3 of the stone height))
  • fulfills the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 27,5 kg sack und 30 kg bucket

ROMPOX® - D3000

The repair paving stone joint elutriant

ROMPOX® - D3000 is ...

  • for medium to heavy traffic loads
  • for joint widths from 3 mm
  • for joint depths from 10 mm
  • fulfills the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 27,5 kg sack

ROMPOX® - TRAFFIC V2

The hardest paving joint mortar

ROMPOX® - TRAFFIC V2 is ...

  • for heavy traffic loads
  • for joint widths from 8 mm
  • for joint depths from 30 mm
  • fulfills the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 28 kg sack

ROMPOX® - D4000 HR

The quick repair mortar

ROMPOX® - D4000 HR is ...

  • for heavy traffic loads
  • for surface depths from 10 mm
  • for surface temperatures up to -10° C

Colours: sand-neutral, stone grey-concrete, basalt-asphalt
Standard container: 17,5 kg sack

ROMEX® - JOINTING SAND NP

The solid jointing sand that prevents weeds

The ROMEX® - JOINTING SAND NP is a weed preventing jointing sand based on predominat natural raw materials for water permeable joints. Thanks to the uncomplicated and quick application, ROMEX® - JOINTING SAND NP is ideal for narrow joints, especially for interlocking block paving, on patios and driveways with light vehicle loads. The  binding agent ensures that small joint cracks repair themselves when in contact with water. With a choice of colours, you will find a suitable joint to visually match each type of stone. ROMEX® - JOINTING SAND NP fulfills the requirements of AgBB-Schemas, after testing by the eco-Institut in Köln.

Our paving joint sand ROMEX® - JOINTING SAND NP is ...

  • for light traffic loads
  • for jointwidth ab 1 mm
  • fulfills the criteria of the usage category 1 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 25 kg Bag

ROMPOX® - EASY

The easiest paving joint mortar

ROMPOX® - EASY is a ready to use 1 component paving joint mortar. After application it hardens when it reacts with the oxygen in air and is thus vacuum packed. This highly water permeable jointing mortar is very good for DIY use as it is so easy to use. ROMPOX® - EASY can be used on patios, footpaths, non trafficked entry areas or similar pedestrian only surfaces all around the house. The paving joint mortar can be used with almost all types of natural stones, natural and concrete stone slabs as well as clinker surfaces. Polygonal slabs / crazy paving or broken stone slabs are the exception. In this case we recommend using our 2 component paving joint mortars such as ROMPOX® - D1.

Our paving joint mortar ROMPOX® - EASY is ...

  • for pedestrian loads
  • for jointwidths from 5 mm
  • for jointdepths from 30 mm
  • fulfills the criteria of the usage category 1 acc. to ZTV road construction

ROMPOX® - EASY is available in the following colours:

  • sand - neutral
  • sand - stone grey
  • sand - basalt

Standard container: 15 kg and 25 kg bucket

ROMPOX® - 1C-POWERJOINT

The strong 1 component paving joint mortar

ROMPOX® - 1 comp. Power Joint is a ready to use mixed paving joint mortar for water permeable, bonded construction methods. It is quick and easy to apply and is thus suitable not just for professional laying companies, but also for DIY enthusiasts. ROMPOX® - 1 comp. Power Joint is for light traffic loads up to 3 tons and is thus perfect for outside use around the house. With this paving joint mortar you won’t have to worry about frost damage or washing out of the joints. The product is frost, de-icing salt and street sweeper resistant. It also prevents weed growth in the joints. Our strong 1 component paving joint mortar is best for use with 8 mm joint widths and 30 mm joint depths. An advantage of this paving joint mortar, is that it can be applied during drizzle and that protective covering is not needed. During the first weeks after application, a thin synthetic resin film remains on the stone surface. It intensifies the color of the stone and protects it from dirt. This film disappears from the surface in open weather and through abrasion over time.

ROMPOX® - 1C-POWERJOINT is ...

  • for pedestrian loads
  • for joint widths from 8 mm
  • for joint depths from 30 mm
  • fulfills the criteria of the usage category 1 acc. to ZTV road construction

Colours: sand-neutral, sand-stone grey, sand-basalt
Standard container: 25 kg bucket

ROMPOX® - DRAIN

The permeable paving joint mortar

ROMPOX® - DRÄN is a highly water permeable synthetic resin based 2 component paving joint mortar. This has been our classic product since it was first developed. ROMPOX® - DRAIN is used all around the house, especially in driveways and parking spaces in front of the house. Almost all natural and concrete stones as well as slabs can be jointed, from joint widths of at least 5 mm and thus protect your paved stone surface permanently against weedgrowth. During the initial period after jointing using a 2 component epoxy resin paving joint mortar, a thin film of synthetic resin remains on the stone surface, which intensifies the colour of the stones and protects against dirt. This film disappears over time due to weathering of the surface and abrasion.

Using the highly water permeable paving joint mortar ROMPOX® - DRAIN you can do your part for the environment. You will be strengthening your surfaces, paths and driveways without sealing them! That is why many communities support ecological surface strenthening by providing grants or reduced drainage fees.

Our paving joint mortar ROMPOX® - DRAIN is ...

  • for light traffic loads up to 3 t
  • for jointwidths from 5 mm
  • for jointdepths from 30 mm
  • fulfills the criteria of the usage category 2 acc. to ZTV road construction

ROMPOX® - DRAIN is available in the following colours:

  • neutral
  • stone grey
  • basalt

Standard container: 26,8 kg sack

ROMPOX® - DRAIN plus

The secure paving joint mortar

ROMPOX® - DRAIN plus is a 2 component epoxy resin paving joint mortar, that is used for surfaces with light to medium traffic loads. Our permeable paving joint mortar ROMPOX® - Drain has been improved to become „PLUS“ and can be applied at the lowest temperatures and in the rain. It is no longer necessary to cover the surface after application. It also enables an even quicker re-opening to traffic.

ROMPOX® - DRAIN plus is ...

  • for light traffic loads up to 3 t
  • for joint widths from 5 mm
  • for joint depths from 30 mm
  • fulfills the criteria of the usage category 2 acc. to ZTV road construction

Farben: neutral, stone grey, basalt
Standard container: 26,5 kg sack and 28,5 kg bucket

ROMPOX® - D1

The proven paving joint mortar

Our proven 2 component epoxy resin paving joint mortar ROMPOX® - D1 is a real allrounder. Thanks to it’s good flow capacity, it can be used for joint widths from 3 mm. The flow capacity also makes it suitable for use with polygonal slabs, which often have uneven edges and conical joints and are hard to joint. It can be used in drive- and entryways, as it can withstand loads up to 7,5 tons and is suitable for the repair of old paved stone surfaces. Jointing polygonal slabs and crazy paving, can be done whilst standing by washing in the product onto the unbonded surface.

ROMPOX® - D1 is ...

  • for medium traffic loads up to 7,5 t
  • for joint widths from 3 mm
  • for joint depths from 30 mm
  • fulfills the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 27,5 kg sack and 30 kg bucket

ROMPOX® - FLEX-LIGHT

The viscous elastic paving joint mortar

ROMPOX® - FLEX-LIGHT is a 2 component paving joint mortar, suitable for joint widths from five millimetres and joint depths from 30 millimetres on surfaces with medium traffic loads. It is the first and only viscous elastic jointing mortar on the market. Thanks to it’s maximum elongation ε of 6,15 % the material can be used for bonded and unbonded construction. It is water permeable, self-compacting and water emulsifiable. The jointing mortar ROMPOX® - FLEX-LIGHT also prevents all weed growth.

  • for medium traffic loads up to 7,5 t
  • for joint widths from 5 mm
  • for joint depths from 30 mm
  • can be built to fulfill the criteria of the usage category 3 acc. to ZTV road construction

Colours: neutral, stone grey, basalt
Standard container: 25 kg bucket

ROMEX® - JOINT STRENGTHENER

For hardening sand joints

ROMEX® - JOINT STRENGTHENER is a 1 component special liquid especially for use with natural stone paving stones and concrete and clinker surfaces. Our joint strengthener protects against washing out, wearing out and weed growth. It has very high strength and viscous elasticity, which is a great advantage especially with unbonded construction methods. Because it is a liquid, joints with a minimum joint width of at least 1 mm, which have been filled with paving stone sand, can be easily strengthened. This product is recommended only for pedestrian traffic.

ROMEX® - JOINT STRENGTHENER is ...

  • for medium pedestrian loads
  • for joint widths from 1 mm
  • for joint depths from 30 mm

Colours: transparent
Standard container: 1 l, 5 l and 10 l containers

ROMPOX® - D1 plus

Der Pflasterfugenmörtel für Plattenbeläge

ROMPOX® - D1 plus ist ...

  • für mittlere Verkehrsbelastung bis 7,5 t
  • für Fugenbreiten ab 3 mm
  • für Fugentiefen ab 30 mm
  • erfüllt die Kriterien der Nutzungskategorie 3 gemäß ZTV Wegebau

Farben: neutral, steingrau, basalt
Standardgebinde: 26,5 kg Sackware und 28,5 kg Eimer

Būdami modernių produktų gamintoju, su kompanijai priklausančiu centru, galime užtikrinti, kad jūsų lūkesčiai ROMEX® testuotiems. sertifikuotiems bei ženklintiems produktams atitinks aukščiausios kokybės reikalavimus. Mūsų produktų kokybę užtikrina pačių susikurti gamybos standartai, bei reglamentuoti dokumentai.

Trinkelių paviršiai, kuriems nebbuvo naudoti rišikliai, ilgainiui pradeda atrodyti netvarkingai, siūlių vietoje užsiveisia piktžolės, trinkelės pasidengia purvu ir samanomis. Regularus paviršių valymas leidžia išvengti nepageidaujamos augmenijos, išvalius bei panaudojus ROMEX® rišiklius, jūsų santaupos nenukentės.

Greita ir paprasta naudoti, su mūsų gaminiais siūlių pildymas nebus nei sudėtingas nei sunkus darbas. Švaru ir ilgalaikiška. Nebesijaudinkite dėl aplinkos padarinių, mažomis sąnaudomis galėsite atnaujinti paviršius. Be to išvengsite smailių aukštakulnių smigimo.

Rišikliai ir prevencijos judėjimui priemonės.